Products

MT11

Category: Sensors

MT11 Cisco Product

Description

Highlights

Sensor Features

Bare metal or glycol-encased temperature probe options available
Temperature sensor range from -40°C – 55°C (-40°F – 131°F)
Five days on-board storage
Up to five years of battery life
Flexible mounting options

Connectivity

2.4 GHz Bluetooth Low Energy
Compatible with select MR and MV gateways

Additional information

Temperature probe sensors	Bare Metal Temperature Probe Cable length: 10 ft Range: -40°C to +55°C (-40°F to +131°F) Accuracy: -40°C to -30°C = +/- 2°C -30°C to -10°C = +/- 1°C -10°C to +55°C = +/- 0.5°C Glycol-Encased Temperature Probe Cable length: 10 ft Range: -40°C to +55°C (-40°F to +131°F) Accuracy: -40°C to -30°C = +/- 2°C -30°C to -10°C = +/- 1°C -10°C to +55°C = +/- 0.5°C
Wireless Capabilities	Bluetooth low energy: Compatible with MV smart cameras and MR access points Operating frequency: 2.400–2.4835 GHz IEEE standard: 802.15.1 (Bluetooth 4.2 Low Energy BLE)
Data Logging	Data sampling: Sample polling every two minutes; data reporting to gateway every 20 minutes, or immediately upon threshold violation Onboard data storage: 4,000 data points (5 days of data at the default sampling rate) Bluetooth Low Energy (BLE) messages encrypted and authenticated using Cisco Trust Anchor technology
Power	Two AA batteries or power adapter Battery life up to five (5) years Power ratings: 5V; 0.1A
MT11 Operating environment	Temperature: -18°C to +55°C (0°F to +131°F) Relative humidity: 0-95%
Physical Characteristics	Dimensions 117.1mm X 65.9mm x 26.0mm (length x width x height) Battery compartment Multicolor, multifunction status LED General purpose button Reset button USB-C Port Sensor detection plug (receptacle connector)
Warranty	Three-year hardware warranty with advanced replacement
Ordering information	MT11-HW: Meraki MT11 Temperature Probe Sensor MA-CBL-TEMP-ME-1: Bare Metal Temperature Probe MA-CBL-TEMP-GL-1: Glycol-Encased Temperature Probe LIC-MT-XY: Meraki MT Enterprise License and Support (X = 1, 3, 5, 7 years) MA-PWR-USB-XX: External Power Adapter (XX= US, EU, UK, or AU)
In the Box	MT11-HW Quick-start and installation guide 2x AA batteries Mounting equipment: Wall mount backplate Magnet VHB tape 2x drywall anchors 2x mounting screws 8x cable clips (included with sensor probe) Mounting gasket (included with sensor probe) Note: Each Meraki MT sensor requires a license to operate. MA-CBL-TEMP-ME-1 and MA-CBL-TEMP-GL-1 are sold separately but at least one is required for operation.

Reviews

There are no reviews yet.

Be the first to review “MT11”

Name(Required)

First Last

Email(Required)

Phone

Job Title

Company

Industry

Number of Locations/Branches

Country/Region

Address

City State / Province / Region ZIP / Postal Code

Message

Comments

This field is for validation purposes and should be left unchanged.